Pacific Northwest Premier Mobile Motorcycle Dyno Tuner

ECU Flashing

Ship ECU’s to

2 Wheel DynoWorks
13631 NE 126th PL
Suit #420
Kirkland, WA, 98034

We have spent countless hours, on hundreds of bikes, with hundreds of configurations of air filters, exhausts etc, creating custom ecu flashes using dozens of programs. Why? Because we do whatever we can, to get your bike to run as perfectly as possible and create the best tune possible for your bike. This means we use a variety of programs, including ECUnleashed, FlashTune, Woolich Racing, TuneBoy, TuneECU, Motech, Microtech etc. This allows us to tune a broader spectrum of bikes and gives us the option to use the best software possible for each bike. Some are better than others at individual bikes. Since about 2006, motorcycles are being restricted more by software than they are by hardware. This means we are re-writing the software inside the motorcycles ECU to remove these restrictions and properly tune every aspect of modern motorcycles, such as fueling, timing, throttle mapping, individual gearing, cylinders, modes, speedometers, fan temps, air pumps, exup valves etc, the list goes on! If you have more questions please email us at 2wheeldynoworks@gmail.com

We can flash and tune stock ECU’s on the majority of all motorcycles. This can be through a variety of software programs we are certified and experienced in using. What this means is, we adjust everything the ECU controls, so we can optimize your bike for peak efficiency and performance with a simple flash. This means you don’t need any aftermarket piggy back plug in controllers for fueling or timing, on some bikes you can even run quickshifters off of the stock ECU’s and multiple maps, etc. The cost is between $250-$550 depending on the bike, please call or message for more information as this is the latest and greatest cutting edge tuning technology services that 2 Wheel DynoWorks is proud to offer to its customers.

140 responses

  1. Herman

    Hi guys,

    I have heard a lot of gd reviews from the reflashing of ECU of MT/FZ-09. Do u guys still do the reflash if the ecu were to be send from Asia?(SINGAPORE).In singapore most of the MT-09 had the reflash from Yamaha but i still do think that this bike had a lot of potential if its true capabilities are unleashed.

    Anyway here in Singapore, the law had many stringent requirements. with the ECU reflash, its not to obvious to be seen as breaking the law 😄. Plus its also to the consumer advantage.

    Hope to here from you guys soon.

    February 20, 2015 at 7:04 AM

  2. Jason R Mallon

    Would like a cost on flaching my stock 2008 Hayabusa. I have installed a Akropovic Full exhaust 4-2-1 and a K&N air filter. No other mods have been made and i have no additional fuel management system components. Can you please contact me with a price and instructions. I would like to know if you can select mutiple maps up using my ABC selector already on the bike?

    February 27, 2015 at 1:25 PM

    • Starting at $349 for mail in flash and $449 for in house dyno, harness install and full custom tune

      March 2, 2015 at 10:41 PM

  3. Andrew

    Hi, I have a 2014 Yamaha FZ-09. I was just wondering if I could send in my ECU to be reflashed and how much it would cost. And also if I should get a different air filter other than stock before I do so or if it would even matter. Thanks and hope to hear back from you soon!

    Andrew.

    March 2, 2015 at 4:29 PM

    • $349 mail in cost, secured drop box address is listed under contacts, air filter is ok either way!

      March 2, 2015 at 10:42 PM

  4. Aaron

    I have a 2012 1199S with a Termi slip on. How much do you charge for an ECU flash and what are the realistic gains you have seen. Will the climate make a difference as I live in Ottawa Canada. Thanks.

    March 9, 2015 at 11:58 AM

    • I’m sorry but we only perform individual cylinder tunes with power commander 5. We don’t provide a ecu flash service at this time.

      March 19, 2015 at 7:29 AM

  5. Fulford

    Can you tune 2009 KTM RC8R?

    April 14, 2015 at 8:46 PM

    • Sure can! We have many options for tuning the RC8R via a fuel programmer or straight through the ECU!

      April 15, 2015 at 7:48 AM

  6. Mark

    How long does it take to flash an ECU on 14 FZ 09 and return ship?

    April 16, 2015 at 6:26 PM

    • Flash takes 30 seconds. Shipping is usually 3-5 business days depending on whats paid for.

      April 16, 2015 at 10:03 PM

    • Mark

      Do you have a specific tune for an M4 slip on exhaust?

      April 26, 2015 at 4:17 PM

      • For most bikes yes

        April 29, 2015 at 11:58 AM

      • Mark

        I have a 2014 FZ09 with an M4 exhaust

        May 4, 2015 at 8:00 PM

  7. Fulford

    What would it cost to tune RC8R?

    April 18, 2015 at 3:27 PM

  8. Brandon tinker

    How much do you charge to reflash my 2012 yamaha super tenere if i mailed it

    April 21, 2015 at 10:11 PM

  9. Fulford

    Would you recommend leaving air box stock?

    April 27, 2015 at 1:56 PM

    • Depends on the bike. Give me a call to discuss further 425-269-5332

      April 29, 2015 at 11:58 AM

  10. Can you do ECU reflash and dyno for the 2015 FZ-07?

    May 17, 2015 at 10:58 PM

  11. Can you do ECU reflash and dyno for the 2015 Yamaha FZ-07?

    May 17, 2015 at 11:01 PM

  12. Awesome! How much does that cost?

    May 20, 2015 at 5:09 PM

  13. Ted

    ECU flash for ’08 ZX-10R? Would like remove the low gear timing retardation, top end timing retardation, fuel cut-off, and clean up the fuel mapping. I’ve heard this is fairly standard stuff for those that want to get more trackday satisfaction out of this gen 10R.

    May 30, 2015 at 11:56 AM

  14. scott jarzab

    How much would it be to flash a 2006 gsxr 1000. With full exhaust, cam?

    June 8, 2015 at 11:58 AM

    • We’d love to help, a custom flash like you would need because of the custom modifications varies on options but starts at $349.

      June 8, 2015 at 2:02 PM

  15. Josh Olson

    Do you you do a ride-in flash as opposed to mailing it in? I am local. Cost for ’12 R1? And are you using ECUnleashed to do it? Bone stock, just want to experience some of the upgrades as well as have the fan come on sooner.

    June 11, 2015 at 12:11 PM

    • We do ride in flashing all the time! Look up our facebook and you’ll see we try to post quite a few of them! We have a few options for flashing your R1, the price range starts at $349 depending on which option we go with that suits your bike the best! Shoot me an email at 2wheeldynoworks@gmail.com to get a time set up

      June 11, 2015 at 3:43 PM

  16. Tom Ward

    hey guys…do you have an ECU Flash for a 2014 FJR 1300? Will it eliminate the lazy off idle throttle response?

    July 19, 2015 at 5:10 AM

    • I’m sorry, we do not have a flash available for the FJR1300, yet. Hopefully, it will be available next Spring. We can only tune with a Power Commander at this time.

      August 25, 2015 at 1:31 PM

  17. Conrad Bishop

    I was wondering if you guys had an update for removing the top speed limiter on 2015 FZ-09? Does the reflash take care of that?

    August 7, 2015 at 9:13 PM

    • Removing the speed limiter is standard on all flashes for the FZ-09

      August 10, 2015 at 10:00 AM

  18. Tom Ward

    I was wondering if you guys had an ECU flash for the Gen III FJR 1300? If so, what does it include?

    August 10, 2015 at 11:07 AM

    • I’m sorry, we do not have a flash available for the FJR1300, yet. Hopefully, it will be available next Spring. We can only tune with a Power Commander at this time.

      August 25, 2015 at 1:31 PM

  19. sean

    I own a 2012 Ducati 848 course evo se. Full GPR exhaust is all that’s done to it. Looking to get the ecu reflashed. How much would that run?

    September 7, 2015 at 8:16 PM

    • 848 ECU flashing can’t be done in-house here. We would refer you to http://www.rexxer.com to have the ECU flashed, and to have the o2 sensors removed. Once it is back, we would install a PCV in order to go through and do a complete cylinder balance and custom mapping on the dyno. $249 for cylinder balance w/tuning.

      September 9, 2015 at 10:21 AM

  20. Ira

    Do you have a tune for a 2015 DL650? I plan on getting the scorpion exhaust for it.

    September 9, 2015 at 12:47 PM

    • DL650 needs a PowerCommanderV. Comes with O2 optimizers, we do an air injection block off, and custom dyno tuning. Email or call for pricing.

      September 10, 2015 at 8:07 AM

  21. Paul Grady

    Looking to reflash my ZX12R 2003 model.
    Do you have the capability to reflash this model and year if so what is the cost?

    Regards.

    October 5, 2015 at 6:04 PM

    • You’d get more gains from a PowerCommander tune for your money.

      October 7, 2015 at 12:52 PM

  22. Rob

    Can you do FJ-09 with Akrapovic Ti and a freer flowing air filter?

    November 1, 2015 at 3:58 PM

    • Absolutely, give us a call or email for more details!

      November 4, 2015 at 9:00 AM

  23. Christian Hightower

    Hello, I have a 2013 zx6r 636 with 1,200 miles.
    -M4 slip on exhaust

    How much will it be for an ECU flash and do you recommend it? Do I get to choose anything or you guys do it all yourself?

    December 28, 2015 at 9:13 PM

    • Absolutely shoot me an email to go over your options!

      December 28, 2015 at 9:14 PM

  24. Joshua

    Happy Holidays! How much to flash an 04 R1 to help with smog block off plates, upgraded air filter and velocity stacks, gutted cat and baffled mufflers? Thank you

    December 30, 2015 at 2:04 PM

    • Shoot me an email, we have a special running until the first for our flashes

      December 30, 2015 at 2:05 PM

  25. Carlos

    Need to have my 07 GSXR 1000 Tuned. Mods are Jardine Slip-On, BMC street Filter. I was thinking about factory pro velocity stacks. Should I wait til I get the velocity stacks and was thinking about changing out the exhaust to yoshi Single exit exhaust (removing stock cat). Will I have to retune with yoshi exhaust. Also would it be good to have ecu flashed and have bazzaz z-afm to keep af in good range.

    January 8, 2016 at 8:35 AM

    • We have quite a few options for you, give me a call 425-269-5332 and we can go over what works best for your bike. Email 2wheeldynoworks@gmail.com as well to set up an appointment

      January 11, 2016 at 9:49 AM

  26. Brian graham

    Hi, I am wondering if you have the means to flash and/or tune the 2016 kawasaki zx10r? There is still not a pc5 available, sadly.

    February 9, 2016 at 9:18 PM

  27. dave

    what can you do for my 05 r1

    March 5, 2016 at 12:04 AM

    • We can flash the ecu but your best bet will be with a PC5 to get about the same amount of improvement. There is not a lot held back on that bike due to software.

      March 10, 2016 at 2:19 PM

  28. dave

    appreciate the info so much for the pc5

    March 10, 2016 at 6:21 PM

  29. dave

    so how much for the pc5

    March 10, 2016 at 6:26 PM

  30. John Patterson

    Ninja 300 ecu flash?

    March 13, 2016 at 10:03 AM

  31. corey leggett

    Do you have the dyno numbers for 07 cbr 100rr and I have a full titanium ladybird gp exhaust headers and all you can tune the ecu to that also to my altitude in reno nv

    March 17, 2016 at 6:48 PM

    • Unfortunately at this time we are still waiting for the software company to release support for the ’07 and older models.

      March 17, 2016 at 6:54 PM

  32. Eric

    I own a 2008 Kawasaki Concours 14. I would like to smooth out the on/off jerky throttle response. I was inform your ECU remapping remedies this.

    How much would is cost? Also do you suggest anything else done first such as block of plates?

    Eric

    April 2, 2016 at 9:30 PM

  33. Jason

    2014 Triumph Street Triple R, Competition Werkes GP Exhaust and K&N Air Filter. ECU Flash? When are you guys coming back to Vancouver, Wa?!!

    April 4, 2016 at 2:36 PM

  34. Aaron Miksch

    2015 suzuki GSX-S750, ecu flash for a danmoto slipon and a k&n airfilter?

    April 8, 2016 at 7:48 AM

    • Yes. Shoot me an email or call to go over your questions in more detail

      April 8, 2016 at 11:35 AM

  35. Michael costa

    Need my fz07 ecu flashed with yoshimura exhaust system with no baffle and k&n filter.

    Do you have an ecu uninstall guide?

    What do I have to do besides mail the ecu to the address listed?

    April 24, 2016 at 8:00 PM

  36. Plinio Goncalves

    Hello,

    I am not sure if I understand fully what services you provide. I have been using PCV for a while and I was wondering what options do you have for my 2016 Yamaha Fj09 in regards to running.

    Thanks

    May 5, 2016 at 12:05 PM

    • The ecu flash has the fueling already built into it, and so a PCV will no longer be necessary. In addition, the ecu flash optimized everything else the ecu controls, removing restrictions and a load of other things as well.

      May 5, 2016 at 7:15 PM

  37. vincent

    How much would it be to have my ecu flashed on my 2006 gsxr 1000?

    May 13, 2016 at 9:13 AM

  38. kevin riley

    How much do you charge for a flash?

    May 28, 2016 at 8:44 PM

    • Pricing varies depending on application, between $249-$499

      May 29, 2016 at 7:03 AM

  39. nick

    I’m looking to do an ecu flash for a cat delete and slip on exhaust for a 2016 zx10r non abs, could you give me any more info? Pricing? Power gain estimates?

    May 29, 2016 at 6:20 AM

    • It’s an amazing flash. Shoot us an email and we can go over all the details because, there is a lot! We’re seeing 40hp at redline to the wheel increases

      May 29, 2016 at 7:04 AM

  40. Ted Pettit

    I have an 08 ZX-10R with the following relevant mods:
    -Full Two Bros Exhaust
    -Two Bros Juice Box Pro
    -HealTech XTRE
    -HealTech QuickShifter QSE1
    -K&N Air Filter
    -Ivan’s Block Off Plates
    I had the ECU flashed at another shop and now the starter interlock no longer works. They won’t respond to me.
    With your flash, can you fix my interlock issue? I’ve removed the XTRE to determine if it was interfering with the interlock with no change.
    With your flash, can I do away with the XTRE and/or Juice Box?

    May 29, 2016 at 7:25 AM

    • Definitely give me a call 425-269-5332 and let’s see what we can fix for you. Our flash does include fueling and timing so the tre and juice box will no longer be needed.

      May 29, 2016 at 11:06 AM

      • Ted Pettit

        Excellent, I will call you Tuesday morning for details, pricing, and turnaround time. Thanks!

        May 29, 2016 at 11:57 AM

      • We’ll be in around 9.

        May 30, 2016 at 5:47 PM

  41. Zoltan Csordas

    Hi there,

    I live in UK and I’ve got a Yamaha FZ 07 with akrapovic titanium exhaust (baffle out) and DNA air filter stage 2.
    I would like to send my ECU to you guys. Could you guid me in this process, please. What is the next step and how much is gonna be altogether?

    Regards

    Zoltan

    July 8, 2016 at 3:44 PM

  42. Kirk

    Would like to know what you could do for my 2016 r1 as far as generating HP more like the Europe models have you flashed my 2013 r1 and put on a quick shifter and I loved it so let me know what you can do & the cost thanks
    Kirk

    July 11, 2016 at 5:34 PM

    • We have some amazing ecu flash options with the new R1’s that really turn the bike into a new animal with many great options and improvements. Give me a call or shoot me an email to go over them. It’s really exciting what we can do for this bike

      July 19, 2016 at 11:02 AM

  43. Justin grams

    Hello,

    I just purchased a 2016 Yamaha fz-07 689cc
    II am adding an m4 exhaust and up grading the intake I purchased a power commander Dyno jet pcv what would be a good Ecu tune for the bike?

    July 27, 2016 at 6:33 AM

    • Well, with our ecu flash you won’t need that power commander as our flash includes fueling. Send us an email or call to go over more details

      July 27, 2016 at 11:26 AM

  44. Roger

    How much to dyno tune a Power Commander V on a 2015 Aprilia Tuono?

    August 2, 2016 at 8:06 PM

  45. Larry

    Hi, wanted know the price if I sent in my ecu. I have a 2005 gsxr 750 with a full Yoshimura exhaust system an kn air filter.

    September 17, 2016 at 9:41 AM

    • Thank you for the message. We would love to help. We only provide an unrestricted flash that removes all the limitations and adds a few hp. The cost is $199 plus $7 for return shipping. It will have some fuel mapping changes, smoothed and perfected timing, individual gear limitations removed, custom secondary throttle mapping, lower fan temps and speed limiter removed. Please let me know if you have any other questions. We can return ship the ECU the same day we receive it. Thanks, 2WDW
      Please ship ECU to
      2 Wheel DynoWorks
      13631 NE 126th Pl. #420
      Kirkland Wa 98034

      September 19, 2016 at 3:48 PM

  46. Aaron

    2016 bmw s1000rr ecu flash, cost and what exactly does your flash consist of that would be different from bren tune or alpha etc

    October 6, 2016 at 3:50 PM

    • Give me a call or email to go over the S1000RR details

      October 7, 2016 at 7:31 AM

  47. Scott

    2015 ktm 1290 super duke bike is completely stock what’s the cost of flashing the ecu ? and is there any gains to be made?

    October 17, 2016 at 12:07 PM

    • Absolutely. We get great results out of this bike. Give me a call to talk about your options

      October 18, 2016 at 8:52 AM

  48. aaron Pearson

    Hey man Aaron I Live In Jeffersonville Indiana next to the river, if that matters, any way I have a 2006 Yamaha R6 50th anniversary. I ride ALOT On the streets but I do r drag race it at the track on Fridays sometimes , but my point is to just want more power that I know this bike has and it is just not showing so I her this is what I need anD there is alot of BS out there so plz help me and tell me what I need to do cuz I know this bike is faster. Any help would be appreciated i like to spend good MONEY on my bike aND don’t want to be ripped off. Thank you

    October 24, 2016 at 12:11 PM

    • We have some great options for you, send us an email and we can go over them in detail with you

      October 24, 2016 at 2:14 PM

  49. Chris Luna

    If ecu is mailed to you can you flash tune 2017 gsx s 750, and 2016 Z800? And ballpark price for each please? Thanks in advance. Heard you guys are very good.

    November 9, 2016 at 9:26 PM

    • Good morning, We do have a flash for the GSX-S750, however we’re still developing the Z800 flash. The regular price is $349.95 but we do have a Black Friday sale coming up for $289.95. Give us a call and we can go over details of the flashes. 425-269-5332. Thanks!

      November 11, 2016 at 9:04 AM

  50. Chris Luna

    Was wondering if you are able to flash tune a 2016 gsx s750 and 2016 kawi z800 if ecu is maile to you? These would be for a slip on added to the bike. Thanks.

    November 9, 2016 at 10:07 PM

    • Good morning, We do have a flash for the GSX-S750, however we’re still developing the Z800 flash. The regular price is $349.95 but we do have a Black Friday sale coming up for $289.95. Give us a call and we can go over details of the flashes. 425-269-5332. Thanks!

      November 11, 2016 at 9:04 AM

  51. when is the 289.95 going on so i can set up my fz09 with full carbon akra edu flash

    November 13, 2016 at 4:41 PM

  52. Jose Gongora

    Hi there. I have a friend who has all the cables to do the ECO flash for a Yamaha FJ-09. Can i just buy a Licence instead of sending my ECU? This way I think we could flash my ECU withouth having to send it. IS this possible? I ask this because I live in Mexico. Best Regards. José

    December 2, 2016 at 12:54 PM

    • I’m sorry but that is not possible. Send me an email if you’d like to discuss it more.

      December 5, 2016 at 7:20 AM

  53. Steve Rose

    I am enquiring about ecu flash on a 2016 fz09 with M4 exhaust. I bought the bike with the exhaust and headers installed already. After riding in a couple of time I notice that it back fires when I let off the throttle and lags a little when advance the throttle. I am pretty sure that it needs the ecu flash done. I am looking for some feedback. I am interested in the ecu flash and would like a quote. Please let me know.
    Thank you,
    Steve

    December 8, 2016 at 10:46 AM

  54. Anthony noto

    Question is there something you can do for 929rr 01

    January 8, 2017 at 4:24 PM

    • Not in terms of ecu flash. Power commander and tune is your best bet for your bike.

      January 8, 2017 at 6:39 PM

  55. Douglas Ferguson

    Yes I was looking to have my ECU reflash for a 2015 zx14r with a full arachapovic exhaust and a high flowing filter. 423-306-3543

    February 6, 2017 at 5:12 PM

  56. Christopher Howe

    Will I be able to do a ECU Flash and dyno tune for the new 2017 Gsxr 1000R with a two brothers racing full exhaust and K n N Filter.

    February 8, 2017 at 5:46 AM

    • Yes but not just yet, we’ll be announcing it once it’s available.

      February 10, 2017 at 2:35 PM

  57. james kennerly

    Would like to send my ecu for your services. I ride a 2016 zx10r with DNA air filter, Racefit exhaust (slip-on), 520 chain conversion with 16t front and 38 rear. Can you provide cost as well as if you offer military discounts.
    What horsepower gains can i expect?
    Also in house dyno do i have to ship my bike?

    February 13, 2017 at 12:39 AM

    • We’ve got a killer flash for you on your 2016 ZX-10R. It’s one of the best we have, we pick up 40+whp at redline and at least 20whp at the stock peak hp. Cost ranges but usually around the $349 mark. You do not have to ship the bike, just the ECU! Send us an email 2wheeldynoworks@gmail.com and we can get everything sorted out for ya!

      February 15, 2017 at 12:12 PM

  58. Jason Harvey

    I have a 2007 Kawasaki Ninja zx6r that I am interested in having the ECU flashed I have done all the work on my bike myself my exhaust I made a GP pipe running straight out of the cat never had a problem with any lights runs great but I want more, recently got a -1 front sprocket and just did a nice custom paint job on it myself at my shop. What would the this do for me on my bike I like the fact it would run cooler what HP gains would I get. I did the jumper mod and felt the gain so let me know all that will be done by flashing my ECU and how much

    March 8, 2017 at 9:00 PM

  59. Phil

    What can be expected from a GSX-S 750 flash? Debating on either the power commander or a flash. What will the flash change vs the power commander?

    March 18, 2017 at 7:03 PM

    • An ecu flash will include everything a power commander can do and more. it is a much more all inclusive tune, everything the ecu controls, we can control and tune. you’ll get a nice power increase but the low and midrange increase will be the most noticeable and the throttle and on off transitions will be much smoother and more responsive.

      an ecu flash costs less than a power commander so you will be saving money in that regard as well.

      send me an email and we can discuss more details

      March 27, 2017 at 1:31 PM

  60. Dustyn clayton

    2016 gsxr 600, cat delete with voodoo tip\midpipe. How much to flash my ECU?

    April 11, 2017 at 7:15 PM

  61. Michael Watts

    Would you please tell me how to remove the ecu?
    I have some mechanical skills but I do not have a shop manual. Do you have a general set of directions I can follow and look at? Thank you

    April 24, 2017 at 6:56 PM

  62. Edmund Moreno

    I have an 2016 aprilia rsv4 rf with a dna air filter and austin racing slip on exhaust. Can you flash it?

    May 6, 2017 at 2:30 PM

    • Not at this time. One of our software developer companies is actually working on it pretty soon so we’re hoping in the next 6 months to have access for the aprilia ecu to flash

      May 6, 2017 at 11:13 PM

  63. Steven

    Do you guys have a flash for the 2017 FZ09? If so how much does it cost?

    May 12, 2017 at 7:45 PM

  64. Rino di giovanni

    Hi,i live in quebec canada,was wondering how much would it cost me if you would flash my ecu from a 2016 fz 07?i presently have an acropovic exhaust on,

    May 13, 2017 at 8:13 PM

    • Regular price is $349 but we’re currently running a sale for $315.

      May 26, 2017 at 10:05 AM

  65. Tucker

    Have you guys done any work with the Husky 701 SM? I live on the east coast so I would Be shipping you the Ecu to flash for an exhaust slip on with db killers taken out.

    May 25, 2017 at 5:38 PM

    • Unfortunately at this time we are only tuning the 701’s in house on the dyno.

      May 26, 2017 at 10:14 AM

  66. Leon

    I have a stock fz10
    How much would a reflash help leaving everything stock?
    And what is the price ?
    Thanks

    June 29, 2017 at 3:57 AM

    • Flash is on sale for $315. It will help immensely unrestricting and tuning for the stock exhaust which is actually pretty good. Generally picks up 18hp stock. Also helps throttle smoothness and eases up on the engine braking.

      July 19, 2017 at 9:31 PM

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s